Asynchronous electric motor AK4-450U-10

The plant " SZPN "In Kostanay offers to buy AK4 electric motors for 6 kV. AK4 is a three-phase asynchronous electric motor with a phase rotor, which is suitable for driving conveyors, crushers, ball mills and other machinery with heavy starting conditions. The design provides for speed control, an unlimited number of starts, and a change in direction (only from a state of rest).

What electric motor to buy: marking AK4 (6 kV)

Parameters of three-phase asynchronous electric motor with phase rotor AK4

• Network requirements. AK4 connect to three-phase network. Frequency-50 Hz, voltage-6 kV. Starting the engine-from the full mains voltage. A rotor with a starting resistance is included in the circuit.
• Climate-controlled version. We produce AK4 electric motors in the U3 version - for temperate climates and indoor installations.
• The operating mode is continuous (S1). At the same time, the design with phase rotors allows for frequent starts and changes in the direction of rotation.
• Design version IM1001 or IM1002. The body is mounted on legs, the shaft position is horizontal, 1 or 2 ends of the cylindrical shaft are used in the work.
• Cooling method IC01A61. The engine is cooled by air intake from a fan mounted on the shaft.
• Degrees of protection: for the electric motor-IP23 (objects with a diameter of more than 12.5 mm, drops at an angle of up to 60°), for the output box-IP55 (protection against large dust, directed water jets).
• Insulation of windings "monolit2". Steklomagnezitovy tape impregnated under pressure and subsequent heat treatment protects against breakouts, increase the reliability of the engine. Heat resistance class-not lower than "B".
• You can purchase the AK4-450U-10 Asynchronous electric motor at our In Kostanay representative office, call us at +77172696828